RNM


Specifications
Fitting type: Metric Banjo ring hose tail connector
Thread standard: Metric Banjo bolt
Sealing interface: Dual flat-face crush washer sealing
Series: Metric Banjo fitting
Material: Mild Steel 1.0737 (lead-alloyed)
Surface Treatment: Galvanized
RNM (Ring Nippel Metrisch) is a compact, profile-saving metric banjo hose fitting designed for tight routing conditions and low-to-medium pressure fluid lines. It features a circular ring head (the "banjo eye") connected to a hose tail shank. The fitting is anchored into a port using a hollow metric Banjo Bolt passed through the center ring. Tightening the bolt compresses two flat sealing washers (copper or bonded metal-elastomer seals) against both sides of the banjo ring face, creating a reliable, leak-free seal around the cross-drilled fluid pass-through ports. The RNM banjo fitting's key advantage is its ability to allow fluid flow at a 90° angle with a 360° orientation freedom before final bolt torquing. This makes it ideal for tight mounting envelopes in vehicle chassis, hydraulic brake lines, fuel distribution systems, and compact mobile machine control blocks where traditional straight or elbow fittings cannot fit.
| CODE | DN | Ø | L | L1 | ØC | A | K |
|---|---|---|---|---|---|---|---|
| H RNM-5-10X1 | 3/16" | M10x1 | 53,5 | 24 | 3 | 10 | 17 |
| H RNM-06-10X1 | 1/4" | M10x1 | 57 | 28 | 4 | 11 | 17 |
| H RNM-03-12X1 | 1/8" | M12x1 | 55,4 | 22 | 2 | 11 | 20 |
| H RNM-05-12X1.5 | 3/16" | M12x1.5 | 57,4 | 24 | 3 | 12 | 20 |
| H RNM-06-12X1.5 | 1/4" | M12x1.5 | 67,2 | 28 | 4 | 14 | 20 |
| H RNM-08-14X1.5 | 5/16" | M14x1.5 | 68,1 | 28 | 5,5 | 14 | 24 |
| H RNM-08-16X1.5 | 5/16" | M16x1.5 | 68,1 | 28 | 5,5 | 17 | 28 |
| H RNM-10-16X1.5 | 3/8" | M16x1.5 | 73,8 | 29,5 | 7 | 17 | 28 |
| H RNM-10-18X1.5 | 3/8" | M18x1.5 | 74,1 | 29,5 | 7 | 20 | 32 |
| H RNM-12-18X1.5 | 1/2" | M18x1.5 | 75,8 | 30,5 | 9,5 | 20 | 32 |
| H RNM-12-22X1.5 | 1/2" | M22x1.5 | 83,5 | 30,5 | 9,5 | 23,5 | 36 |

Szeretne többet megtudni a termékről?

E-mail
info@intramark.hu

Telefon
+36 52 781 391
+36 30 747 6811

Fax
+36 52 346 917

Intramark HQ
4031 Debrecen,
Kontosgat sor 10.